Bogen X300 Manuale Utente

Black Max™AmplifierX300, X450, & X600 ModelsInstallation and Use Manual© 2005 Bogen Communications, Inc.All rights reserved.54-2063-01E 1204

ConnectionsSpeakers70V "Transformer-Coupled" SpeakersThe Black Max series was designed to drive only 70V constant voltagetype speaker loads.

Sequential Turn-OnSequential Turn-On OperationBlack Max amplifiers contain a sequential turn-on feature that is designed to turn on a bank of Black M

OperationFront Controls & IndicatorsPower SwitchThe Power Switch for the Black Max amplifier is located on the front of theunit. Press the "I

OperationSleep SwitchThe Black Max amplifier includes a sleep mode feature that greatly reducesthe power consumption of the amplifier after it has bee

Troubleshooting10• Power Switch OFF• Breaker (Power Switch) tripped- Turn off, then turn back on• Power Sequencing Switch set wrong- Check Sequential

Specifications* Both channels driven at nominal line voltage 120V AC, 60 Hz.** The X600 requires a 20A, 125V AC power receptacle because its maximum c

50 Spring Street, Ramsey, NJ 07446, USATel: 201-934-8500 • Fax: 201-934-9832www.bogen.comLimited Warranty; Exclusion of Certain DamagesBogen Black Max

NoticeEvery effort was made to ensure that the information in thisguide was complete and accurate at the time of printing.However, information is subj

ContentsPageINTRODUCTION...1Package Conte

iii

IntroductionBogen's Black Max™ amplifiers deliver on what professional sound installers need most: Power and Reliability. PowerWith three differe

Panel DescriptionsBlack Max Front Panel1. Status Indicators - The Status LEDs are multi-purpose indicators, one for each channel.Green - Amplifier is

Panel DescriptionsBlack Max Rear Panel1. Speaker Terminals - Connects to 70V constant voltage speaker loads. One set for each amplifier section. Accep

InstallationMechanical Components1. Rack Ears - Prior to installing the amplifier into a 19" rack, you will need to attach the rack ears. Remove

InstallationVentilationThe Black Max amplifiers were designed to be placed on a table or rack-mounted. For rack-mounted applications,the amplifiers ca